colorFabb PETG Economy 2.2kg X 2.85mm Filament


 

colorFabb PETG Economy is an option for those looking to maintain the high quality standards that colorFabb adheres to at a bit of a bargain per kg.  The economy PETG is provided on large spools and in large quantities of 2.2kg so that you get more value per kilogram out of your purchase.

PETG is a great functional material.  If you're an ABS user, give this a try and you may find that you are a convert.

Note that the spool size is much larger than can fit on nearly any standard printer spool holder.  So, you will need to print one.  OD is 300mm, Bore is 52mm, and width is 102mm.  ColorFabb has shared their design for a spool holder here.  

 

Material:
Colorfabb PETG Economy

Printing Temperature: 235-255C works well on most printers
Printing Speed: 30-50 mm/s
Heated Bed Temperature: 70-80C  Note, if printing on glass or PEI, use a layer of glue or hairspray to avoid damaging your print surface.  
Cooling fan: Off for the first layers, then 75-% fan cooling for best aesthetics, this gives best performance on overhangs and small details. For best mechanical performance try printing with the least amount of cooling needed, for optimal layer adhesion.
Diameter Tolerance:  ± 0.1 mm or better
Density: 1.2-1.3 g/cm3
Glass Transition Temperature: 70C

 


Related Items