PRUSA RESEARCH ACQUIRES PRINTED SOLID INC. TO BE THEIR EXCLUSIVE RESELLER AND SERVICE CENTER IN THE USA
Printed Solid
Next Gen Safety Enclosure for Prusa Mini
Next Gen Safety Enclosure for Prusa Mini
Couldn't load pickup availability
With over 11 years developing enclosures for 3D printers, we are excited to launch the next generation of enclosures. We completely reworked everything from the ground up.
New materials, new approach to cooling, new spool holder, new universal design. Better fire protection over previous generation and easily modifiable by the end user.
Dimension's
L 20 1/4" W 16 1/2" H 20 3/4"
your printer must be two inches smaller per each dimension to fit
With over 11 years developing enclosures for 3D printers, we are excited to launch the next generation of enclosures. We completely reworked everything from the ground up.
New materials, new approach to cooling, new spool holder, new universal design. Better fire protection over previous generation and easily modifiable by the end user.
Dimension's
L 20 1/4" W 16 1/2" H 20 3/4"
your printer must be two inches smaller per each dimension to fit
More Info
This enclosure works with the Prusa Mini
What's Included
-
An instruction sheet
-
The laser cut acrylic panels
-
CNC routed side panels
-
Door hinges
-
Sensor and fasteners
-
The 3D printer is not included with the kit
Internal dimensions are 20" deep by 16" wide by 20" tall.
- Reviews
- Questions
- enclosure
- quality
- assembly
- 82313
- sheets
- tape
- Prints
- nuts
- anyone
- mini
United StatesUsing it for an Ender 3V2
Received it 2nd-hand from the purchaser (Co-worker who moved on from 3D printing) Managed to fit a Creality Ender3-V2 with a Sprite Direct Drive into the Enclosure. Feeding from a Dry Box on a shelf above through the top port. Prepping to remove all the electronics from the inside and mounting externally. Building a Water Cooling system with a 280mm Radiator and insulating the enclosure for heating. Great construction and assembly is easy, and all components are of great quality...
United StatesSqueezed a CR-3V2 with Sprite Hotend into the enclosure
Received it 2nd-hand from the purchaser (Co-worker who moved on from 3D printing) Managed to fit a Creality Ender3-V2 with a Sprite Direct Drive into the Enclosure. Feeding from a Dry Box on a shelf above through the top port. Prepping to remove all the electronics from the inside and mounting externally. Building a Water Cooling system with a 280mm Radiator and insulating the enclosure for heating. Great construction and assembly is easy, and all components are of great quality...
United StatesGreat enclosure for Prusa Mini
Really awesome enclosure. The assembly was pretty straightforward and everything fit together well. The design used for securing the panels together is pretty creative and effective, at least so far! The packaging of the panels was very well done. Everything was padded and all of the aluminum and poly had protective sheets on them for shipping. Plenty of extra hardware included which I appreciate a lot. The only downside is the enclosure is about .25” too narrow to fit the paver that my printer used to sit on, though this is not really a fault of the enclosure itself and I could easily trim the paver if I want to add it in the future. One question I had about the enclosure was how much it would dampen the noise from the printer. The paver dampened a lot of noise, but I felt there was room for improvement. I have the enclosure sitting on a solid oak table now, which is a nice replacement for the function the paver was carrying out before, and I’m happy to report that the enclosure takes care of a lot of the remaining noise from the fans, loud bearings (I need to replace them :-)), etc. It’s not silent, but the “sting” has been taken out of any noise made by the printer and it is far less annoying with long running prints. For context, it is now quieter than my refrigerator and I am plenty happy with that level of noise reduction. I would recommend this enclosure to anyone looking for a nice solid setup without any hassle. I feel it’s similar to the MINI in that you may be able to find less expensive enclosures out there but the quality and ease of assembly/use make this enclosure well worth it.
United StatesNice enclosure
This is a nice, well designed enclosure. Assembly was straightforward. Follow the advice to use tape to hold the nuts in place during assembly. Also, it helps to have a helper. I went with the Black version and it's definitely dark inside. I solved that by installing a few LED strip lights. It's really great now! As noted by other reviewers, there are some nice accessory models available at https://www.prusaprinters.org/prints/82313-prusa-mini-enclosure-accessories-and-adapters.
United StatesClever little enclosure. Careful: Acm edges are not deburred
It’s an enclosure. It’s clever in the mechanism for how it’s assembled. What isn’t mentioned is that the Acm (painted aluminum sheets sandwiching some plastic) sheets are not deburred. I got 2-3 tiny scratches while assembling it!
- Choosing a selection results in a full page refresh.