Prusament PLA 1.75mm Lipstick Red 2kg - Made in USA

Prusament PLA is our own in-house made filament. Select filaments are now also made by Printed Solid in Newark, Delaware, USA. Great efforts have gone into ensuring Printed Solid uses the same exact machinery, resin, colorants, spools, processes and tolerances that are used in the Prusa factories. The result is Prusament made in the USA that performs just like Prusament made in Prague.

The whole manufacturing process is closely monitored and tested - we guarantee ±0.02mm precision (± 0,03 for blends) and highly-consistent colors. You can inspect parameters of every spool we made at prusament.com. Check the sample spool!

± 0.02 mm Manufacturing Guaranteed Precision

We believe the industry standard of 0.05 mm isn’t sufficient for perfect 3D printing. Instead, we guarantee ±0.02mm precision (± 0.03 for blends) and highly-consistent colors in our filaments.

High Quality You Can Check Yourself

We are the only manufacturer that gives the option to inspect parameters of every filament spool. Scan a QR code on the spool to see all details online (check the sample spool).

Printing Setup

Before printing, learn about print surface preparation in our dedicated article and material table.

Basic Attributes

Easy to print

Suitable for prints of any size

Hard

Low warping

Brittle

Poor high-temperature resistance

Difficult to sand (hard material, melts easily)

Beginners tips & tricks

Popular among both beginners and advanced users

PLA is the easiest-to-print filament we make. It’s reliable and it doesn’t require any print preparations or difficult post-processing methods. If you’re new to 3D printing, it’s best to start with PLA before using other materials.

Sanding

When post-processing PLA, it’s better to use wet sanding. Without water you’ll quickly start heating the plastic by friction, it will melt locally and deform. Also, without water, the sanding material would clog easily.

Gluing

PLA can be glued with many types of glue. We recommend using superglue for most of the parts. Certain PLA filaments may be also glued using acetone, however, it strongly depends on the various additives and colors used.

Notes

This PLA is made in-house by Printed Solid.

1.75 mm filament is manufactured with precision of ± 0.02 mm (±0.03 for blends)

Before printing, make sure the surface of the heatbed is clean as described in the 3D Printing Handbook.

If you choose a 2 kg spool, please download and print the 2kg spool holder as it will not fit the standard spool holder.

To dry the filament, please follow the instructions in our article.