PRUSA RESEARCH ACQUIRES PRINTED SOLID INC. TO BE THEIR EXCLUSIVE RESELLER AND SERVICE CENTER IN THE USA
Printed Solid
Voron V0 and V0.1 and V0.2 Clear Acrylic Sheets for Top Hat
Voron V0 and V0.1 and V0.2 Clear Acrylic Sheets for Top Hat
Couldn't load pickup availability
Clear acrylic pieces for the top hat on the Voron V0 Printer. All are laser cut and shipped with the protective covering on them.
The V0 kit contains the following:
4 Piece 204mm x 65mm
1 Pieces 170mm x 170mm
All pieces are 3.175mm(1/8") thick
The V0.1 kit contains the following:
2 Piece 207mm x 74mm
2 Piece 206mm x 73mm
1 Pieces 180mm x 210mm
All pieces are 3.175mm(1/8") thick
The V0.2 80mm kit contains the following:
(Standard Size 80mm top hat Frame)
4 Piece 211mm x 70mm
1 Pieces 211mm x 211mm
All pieces are 3.175mm(1/8") thick
The V0.2 100mm kit contains the following:
(for Use with v0.2 Upgrade kit 100mm top hat Frame)
4 Piece 211mm x 90mm
1 Pieces 211mm x 211mm
All pieces are 3.175mm(1/8") thick
**Warning U.S acrylic is 3mm to 3.175mm thick. (not 2mm)**
these files maybe easier to use for the 3mm panels.
https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/LoCoCNC/3mm_tophat_panel_parts
- Reviews
- Questions
- stock parts
- anyone
- design
- Item
- panels
- products
Good support desk
Got sent wrong items first but was rectified at no charge. Only complaint is shipping took a while at first.
United StatesVoron 0.1 extra-thick top hat panels
The sheets are made of thick acrylic, measuring at 3.0mm thickness. This requires use of modified retaining parts and even then the fit is not very good, as the top hat was designed around thinner panels. If one were to modify the entire tophat and not just the retainers, it could work well. Unfortunately, 3mm acrylic is all that is easily available in US. At least the actual panels measure at 3.0mm instead of the advertised 3.175... that would be even more difficult to work with.
United StatesDoesn't fit
Tried to install them only to realize top uses 2mm not 3mm that printed solid sells. There is no warning on product page that these are not within design spec for top hat panels. Found mod that should work but there should have been warning/notice from PS.
United StatesGreat products, Great company
Item worked as intended, as have all of the products I have purchased. I recommend Printed Solid and their products all the time.
United StatesUpdate of my previous review, I designed new parts and now I really like these panels.
The 3mm is better than the thinner 1.5mm the design calls for. I created new parts that work for these panels. Anyone building a V0.1 and buys these high quality panels should not print the stock parts but get the modified parts from the LoCoCNC Voron Users folder on the official Git
- Choosing a selection results in a full page refresh.